top of page
BAE LOGO.png

BAE

​

BAE는 70년대 이전 VINTAGE DESIGN에 충실한 하이 엔드 마이크 프리 앰프/이퀄라이저를 제조합니다. 캔힐(St.lves)이나 젠센은 고품질 변압기를 선호하는 사람들로, 불가능이 없는 빈티지 철학에 추구합니다. 

 

​

312A-1.jpg

                 312 A

The 312A is available as a 500 series module or a single or dual channel 19" rackmount.

Because there are no capacitors in the audio path, the 312A is super fast and punchy, allowing transients to pass easily, making them a favourite for drummers.

Made with the highest quality parts including Jensen input and output transformers and the BAE 2015 opamp. The 312A also includes a high impedance DI for instruments.

500C FET Compressor.jpg

                    500 C

Based on the design of studio staple FET compressors of the ’60s and ’70s heard on countless hit records, the 500C features controls for input and output gain, plus the four selectable, time-honored compression rations of 4:1, 8:1, 12:1, and 20:1.

In addition to taming peaks, its premium components and classic circuit design add highly desireable analog warmth to your signal, making it an all-star for everything from drums to bass to vocals.

b15-1.jpg

                    B15

Standard 500 series modular size 1.5" x 5.25"3-bands with 5 selectable frequencies per band+16 dB of boost and cut using continuous variable potentiometer

1066D-1.jpg

                  1066DL

The new 1066DL is based on the classic 1066, which features the same mic-line pre-amplification stage as the 1073, but features different frequency selections in its EQ for a whole new sonic palette. The available frequencies on the 1066 are especially well suited to guitar applications because of its unique midrange.

1073D-1.jpg

                   1073D

The 1073D (Deluxe) is essentially a 1073 module with extra high frequencies and a direct input for the 500 series market. Built using the same exact parts as the 10 series module, the 1073D features Carnhill transformers, Elma gold plated switches and Canford wire making this the best sounding Class A mic‐pre EQ module on the block.

1073mp-single-1.jpg

            1073MP-SINGLE

This is the mic pre-amp version of the 1073 equaliser having the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs, and maintained focused mids.

A Carnhill transformer coupled input, with two selectable impedances makes the 1073MP work well with a variety of microphones.

There is also a line input feature for adding depth to 2-bus mixes and a DI input for all passive and active instruments.

DUALDMP-1.jpg

          1073 DUAL DMP

The 1073 Dual DMP features the same pre-amps and the same Carnhill (St Ives) transformers as the 1073 and 1084.

All units come standard with the 'Bootsy Collins' mod (channel one ONLY) which consists of an OEP Carnhill DI transformer to create the first 1073 direct box. The Dual DMP features include two DI thrus, phase reverse, 48V for phantom power, a built in PSU for extra portability and the same hand-wired modular design that BAE is known for.

1073MPL.png

               1073MPL

This is the 500 Series version of the 1073MP (a mic pre-amp version of the 1073 equaliser) having the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs, and maintained focused mids.

1073 Rackmount-1.jpg

                   1073

The BAE 1073 is as authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire.

The BAE 1073 looks identical to the original vintage module and will happily retrofit in vintage Neve 80 Series consoles because the entire product is engineered in exactly the same way as the originals: the same chassis construction, connectors, printed circuit board layouts, hand-wired looms, and circuitry.

BAE 10DCF-1.jpg

                  10DCF

The 10DCF, which builds on the capabilities of the 10DC compressor/limiter, features Carnhill and Jensen transformers, all discrete circuitry while adding a brand new, inductor-based bypass filter.

BAE Hot Fuzz-1.jpg

                HOT FUZZ

The Hot Fuzz pedal is essentially two pedals in one. The left side is a high frequency boost and the right side is an English 1970's style fuzz box. The Hot Fuzz can be used independently or in series to create a high frequency distortion.

BAE-G10-Front.jpg

                     G10

The G10 10-Band Equalizer with Balanced Input and Output and Hi/Low-Pass Filters Is the Ultimate Hands-On Sound Shaping Tool for Tracking, Mixing, or Mastering

1073MP-1.jpg

                 1073MP

This is the mic pre-amp version of the 1073 equaliser having the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs, and maintained focused mids.

A Carnhill transformer coupled input, with two selectable impedances makes the 1073MP work well with a variety of microphones.

There is also a line input feature for adding depth to 2-bus mixes and a DI input for all passive and active instruments.

1073DMP-1.jpg

               1073DMP

The 1073 DMP features the same pre-amp and the same Carnhill (St Ives) transformers as the 1073 and 1084.​

All units come standard with the 'Bootsy Collins' mod which consists of an OEP Carnhill DI transformer to create the first 1073 direct box. The 1073DMP features include two DI thrus, phase reverse, 48V for phantom power, a built in PSU for extra portability and the same hand-wired modular design that BAE is known for.

BAE PDI-1.jpg

                    PDI

  • Neutrik Connectors

  • 1/4" Input

  • XLR Output

  • Through Output

  • Ground Lift Switch

  • OEP/Carnhill Transformer

  • Solid Steel Chassis

  • The same hand-wired construction that BAE is known for.

bottom of page